Retronix offers a set of repairs/refurbishments to ICs such as QFP:
Lead Straightening
Retronix can straighten bent legs on ICs (e.g. coplanarity) to allow auto placement.
IC Retinning
Retronix can refresh or remove the alloy from the legs of an IC and replenish it with either lead or lead free alloy, to resolve a number of issues:
- Old Components – Components which are old may have solderability issues which will cause problems during assembly. Retronix can refresh the alloy on these components to remove any solderability issues
- Alloy Conversion – Retronix can convert from lead alloy to lead free and vice versa, and then provide an XRF test report to prove conversion was successful.
Verification tests:
- Mechanical compliance – After processing, ICs are scanned to ensure compliance using an ICOS scanner. This machine checks for issues such as coplanarity, lead deviation, sweep, slant, body damage, and can then place ICs in a tape or tray
- Electrical Compliance – Retronix utilises a number of electrical tests, including Curve Trace, to verify component is not damaged.
Correct Alloy – Retronix utilizes XRF (X-Ray Fluorescence) testing to establish the composition of alloy on a component lead, and verify it is the correct alloy.
If you have any questions don’t hesitate to contact us directly
or by filling up the form below.
or by filling up the form below.
Feel free to contact us through
the contact information written below.
the contact information written below.