DDM Novastar provides three categories of component counter for taped SMD components: the standard manual driven unit, the deluxe version with preset reel counter and the motor-driven component counter.Rugged, reliable, and easy-to-use, an DDM Novastar SMD counter can be used with any type of taped device – Axial, Radial, or SMD.
You can compare up to three products within a single category. Choose from the following:
GC-12 Standard Component Counter
GC-12 component counter is a reliable and easy-to-use reel system for any Axial, Radial or SMD device.
- Four (4) digit LCD display
- Forward / Reverse function makes counting foolproof
- Counts taped SMD, Axial and Radial components on one reel machine
- Divide-by feature permits exact count of virtually all types and sizes of components
- Non-contact photoelectric infrared smart sensor
- Push-button marks axial and radial component tape
- Counts up to 100 components per second
Dimensions: 6.5″ x 8″ x 5″ (165.1 x 203.2 x 127mm)
Weight: 4.7 lbs (2.13kg)
Display: 4 digit LCD display
Auto Shut-Off: No
GC-30 Deluxe Component Counter
GC-30 component counter is a reliable and easy-to-use systems with presettable count for any Axial, Radial or SMD device.
- Presettable count with audible beep
- AC or battery operation
- Five (5) digit LCD display
- Forward / Reverse function makes counting foolproof
- Counts taped SMD, Axial and Radial components on one machine
- Divide-by feature permits exact count of virtually all types and sizes of components
- Non-contact photoelectric infrared smart sensor
- Push-button marks axial and radial component tape
- Counts up to 100 components per second
Dimensions: 25″ x 11″ x 12″ (635 x 280 x 305mm)
Weight: 13.7 lbs (6.21kg)
Display: 5 digit LCD display
Auto Shut-Off: No
GC-40 Motorized Component Counter
GC-40 motorized component counter is a reliable and easy-to-use systems with presettable count for any Axial, Radial or SMD device.
- Motorized deluxe reel stand
- Auto Shutoff
- Presettable count with audible beep
- AC or battery operation
- Five (5) digit LCD display
- Forward / Reverse function makes counting foolproof
- Counts taped SMD, Axial and Radial components on one machine
- Divide-by feature permits exact count of virtually all types and sizes of components
- Non-contact photoelectric infrared smart sensor
- Push-button marks axial and radial component tape
- Counts up to 100 components per second
Dimensions: 26″ x 14″ x 16″ (660 x 356 x 406mm)
Weight: 23.5 lbs (10.66kg)
Display: 5 digit LCD display
Auto Shut-Off: Yes
or by filling up the form below.
the contact information written below.