Programmable Up Vac Routers
Universal or Dedicated Fixtures and Fiducial Recognition
Fancort offers a wide choice of PCB routers including two desktop models that are available with twin tables for increased through-put. The two desktop routers only differ in the use of fixtures. The “up-vac” model can use our adjustable fixture making it ideal for CM’s with a high mix of panels. The “down-vac” model is designed for use with dedicated fixtures where the production runs are longer, there is no time lost in fixture set-up, and no risk of an operator making the wrong set-up. Finally, our new floor mounted routers offer a vision system and camera system for programming along with some other unique features.
Features
- Janome Desktop Robots
- Programming using a user-friendly teaching pendant with large, 7-line LCD screen. No need to learn complicated programming languages.
- Vacuum system for Down Vac version sits under the board support fixture for removing debris and dust.
- Optional Ionizing air nozzle on the spindle motor reduces static in the debris area
- 50,000 rpm spindle motor
- Repeatable accuracy ±.01mm
- Three models available up to a work area of 493mm x 437mm x 150mm
- Store up to 100 programs or 6000 work points on the memory card resident in the router.
- Fancort will design and buildyour fixtures
- For in-line applications, a SCARA routing system is available
- Optional software converts program data to spreadsheet format for editing
- Optional enclosure available
- Fancort Presents PCB Depaneling Solutions for Scored or Tab-Routed Panels
Pre-Scored Board Machines
Economical Machines for Low to Moderate Volumes
Fancort offers 5 models of pre-scored PCB depaneling machines starting with low volume manual units working up higher volume motorized units. All are designed to minimize board stress and the potential for component damage. We also offer two units for simulating metalized boards especially those found in LED manufacturing
Model VPD2-400
For low to moderate volume. Capable of separating .050 – 070” from score line without damaging components. Board sizes up to 16”
Model VPD3C-1M:
Motorized for moderate volume. Capable of separating .030 – 040” from score line without damaging components. Board sizes up to 18”
Model VPD3C-1:
Motorized for moderate to high volume. Capable of separating .030 – 040” from score line without damaging components. Board sizes up to 24”
Model VPD5-500P:
Designed to separate metallized boards with knives measuring 300mm. Boards longer than 330mm can be separated because the machine is open on both ends and boards can be fed through in more than one cycle. A longer machine is alo available: Model VPD5-500P has 500mm length blades.
Model VPD5-330:
Motorized for moderate to high volume. Capable of separating .020” from score line without damaging components. Board sizes up to 330mm x 2.5mm thick.
Depaneling Spare Parts
Getech inline routers are highly engineered for reliability and repeatability in high volume production environments. This series includes the GBR bottom router which does not require dedicated fixturing, the GAR twin table machine, and the RBM twin table machine with post singulation automation.
or by filling up the form below.
the contact information written below.